Plumbing · Hydra homeowner guide
Low Water Pressure?
Check which outlets are affected. Boiler pressure and tap pressure are different things.
Poor flow at a tap can have several explanations, from a restricted outlet to an issue with the incoming supply. Before adjusting anything, find out whether the problem affects one fitting, hot water only, cold water only or the whole property.
Start with the cold kitchen tap
Compare it with other outlets you can check safely. If the kitchen cold tap runs normally but another fitting does not, the issue may be within the property or at that fitting. If several cold outlets are affected, consider the incoming supply as well as the internal pipework.
Ask whether neighbours have the same problem and check the water supplier’s current service information. A problem affecting nearby properties may need the supplier rather than a change to your plumbing.
Simple checks for one poor outlet
- Look for obvious debris at an accessible outlet or strainer.
- If the manufacturer describes a removable aerator and you can remove it without force, follow those cleaning instructions. Do not dismantle unfamiliar mixer cartridges or concealed controls.
- Check whether a clearly identified local isolation valve has recently been adjusted. Do not force stiff controls.
- Compare hot and cold flow, taking care with hot water. Note whether the problem occurs all the time or only while another outlet is running.
Pressure and flow are not the same measurement
Flow describes how much water is delivered over time; pressure describes the force available. A quick bucket test does not establish every aspect of a supply problem. An investigation may need static and running pressure measurements alongside flow and system checks.
The gauge on a sealed heating system measures that circuit, not the pressure of the mains at your tap. Adding water to a boiler is not a remedy for poor incoming mains pressure. If the boiler also has a warning, treat that as separate information to report.
Avoid adjustments based on guesswork
Do not alter a pressure-reducing valve, pump setting, unvented-cylinder safety control or shared supply arrangement without the right knowledge. A change that appears to improve one outlet can create other problems or defeat the intended protection.
When to ask for help
A sudden unexplained change, an associated leak, recurring poor hot-water delivery or an issue that affects the whole home deserves investigation. If there is no incoming water and neighbours are also affected, contact the water supplier.
Send Hydra your postcode, the affected outlets, hot/cold comparisons, when the change started and any recent work. Photos of the fittings or equipment can help. Call 01793 939141 or WhatsApp us to arrange the next step in Swindon & The Surrounding Areas.
Further reading
Prefer us to take a look?
Hydra serves Swindon & The Surrounding Areas. Tell us your postcode and what you have noticed.
