Plumbing · Hydra homeowner guide
Find Your Stop Tap
Know where the water shuts off before a leak becomes an emergency.
Your internal stop tap controls the incoming water supply to your property. Knowing where it is can save valuable time during a leak. Look for it on a calm day, when there is no water escaping, and show other adults in the household where it is.
Where to look
Common places include beneath the kitchen sink, a utility room, a downstairs cupboard or the area where the supply pipe enters the building. Older and altered properties can have less obvious arrangements. Follow accessible pipework visually, but do not lift heavy flooring, disturb insulation or remove building materials to search.
A small valve beside an individual appliance may isolate only that appliance. It is not necessarily the main stop tap. Flats and shared buildings can also have communal controls: ask the managing agent if you are unsure which valve belongs to your home.
Turning off the internal supply
- Make sure you can reach the valve safely and identify the correct control.
- For a conventional internal stop tap, turn the handle clockwise gently to close it. Other valve designs may operate differently.
- Open the mains-fed cold kitchen tap to check the incoming flow reduces and stops. Some residual water may run first.
- Remember that stored water can remain in tanks, cylinders and pipework. Closing the mains does not instantly drain every part of the system.
Never force a seized handle or use excessive leverage. A valve that does not shut properly needs attention before it is relied upon in an emergency.
What about the valve outside?
The external stop valve may belong to the water supplier and may serve more than one property. Do not operate an unfamiliar or shared valve, enter a dangerous location or leave a chamber cover creating a trip hazard. Contact your water supplier or a plumber for the correct arrangement.
Restoring the water
Only restore the supply when the reason it was isolated has been made safe. Open the control slowly and check the affected area for leaks. If the pipe or fitting is still damaged, turning the supply back on can restart the escape of water.
Make access easier
Keep the cupboard clear, label the valve and save the location in your household notes. If the handle is awkward to reach or does not operate smoothly, ask us about the options. During a leak, prioritise people and electrical safety over possessions; do not enter standing water near electrical equipment.
Need help in Swindon?
Call Hydra on 01793 939141, or message us on WhatsApp. Tell us whether you have isolated the water and whether the leak is still active.
Prefer us to take a look?
Hydra serves Swindon & The Surrounding Areas. Tell us your postcode and what you have noticed.
