Skip to content
Swindon & The Surrounding Areas · Monday–Friday, 8am–6pm
Menu & services

Boilers & heating · Hydra homeowner guide

No Hot Water from Your Combi?

Separate a water-supply issue from a boiler fault before trying a reset.

If a combi boiler stops providing hot water, the useful first question is what still works. Does cold water flow normally? Is the heating operating? Is every hot outlet affected, or only one? These details help avoid treating different problems as the same fault.

Safety first

Do not remove the boiler casing or work on gas, combustion, flue or internal electrical components. Gas work must be done by a suitably Gas Safe registered engineer. If you smell gas or suspect carbon monoxide, stop troubleshooting and follow the official emergency guidance linked below. Do not use an appliance you believe is unsafe.

Checks at the controls

  1. Check the boiler display and photograph any error code before attempting a reset.
  2. Confirm it has power using the normal external controls. Do not investigate exposed wiring or repeatedly reset a tripping electrical circuit.
  3. Check the hot-water temperature and operating mode in the user manual. A setting may have changed.
  4. On a sealed system, compare the cold pressure reading with the model’s specified range. Do not add water if the pressure is already correct.
  5. Use a reset only if the manual says it is appropriate for that fault. If the fault returns, stop repeating the reset.

Do not use another gas appliance as a test if you have any concern about a leak or unsafe supply. A known network interruption can be checked with the relevant supplier.

If only one outlet is affected

A problem at one tap or shower can involve that fitting or its controls rather than the boiler as a whole. Compare a second hot outlet and note whether the first has poor flow, stays cold or changes temperature. Take care around suddenly hot water.

If there is a cylinder

A property with stored hot water has a different system. Cylinder controls, timed hot-water settings or other components may be relevant. This combi checklist does not tell you how to adjust safety valves, immersion wiring or cylinder thermostats. Tell us the equipment you have so the correct visit can be arranged.

When to arrange an engineer

Get help if the fault returns, pressure is repeatedly lost, water leaks from the appliance, there are unusual operating symptoms or the external checks do not identify a simple setting issue. Do not keep resetting or topping up as a workaround.

What to send

Provide the model, error code, cold pressure reading, whether heating works and whether all hot outlets are affected. Hydra covers Swindon & The Surrounding Areas. Call 01793 939141 or WhatsApp us to discuss a visit.

Prefer us to take a look?

Hydra serves Swindon & The Surrounding Areas. Tell us your postcode and what you have noticed.

WhatsApp us ↗